Reef Angel Forum

Code: Select all

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <PAR.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
    // This must be the first line
    ReefAngel.Init();  //Initialize controller
    ReefAngel.Use2014Screen();  // Let's use 2014 Screen 
    // Ports toggled in Feeding Mode
    ReefAngel.FeedingModePorts = Port3Bit | Port4Bit | Port8Bit;
    ReefAngel.FeedingModePortsE[0] = Port1Bit | Port8Bit;
    // Ports toggled in Water Change Mode
    ReefAngel.WaterChangePorts = Port1Bit | Port2Bit | Port3Bit | Port4Bit | Port8Bit;
    ReefAngel.WaterChangePortsE[0] = Port1Bit | Port8Bit;
    // Ports toggled when Lights On / Off menu entry selected
    ReefAngel.LightsOnPorts = 0;
    ReefAngel.LightsOnPortsE[0] = 0;
    // Ports turned off when Overheat temperature exceeded
    ReefAngel.OverheatShutoffPorts = Port1Bit | Port2Bit | Port3Bit;
    ReefAngel.OverheatShutoffPortsE[0] = Port1Bit | Port5Bit | Port8Bit;
    // Use T1 probe as temperature and overheat functions
    ReefAngel.TempProbe = T1_PROBE;
    ReefAngel.OverheatProbe = T1_PROBE;
    // Set the Overheat temperature setting
    InternalMemory.OverheatTemp_write( 820 );


    // Ports that are always on
    ReefAngel.Relay.On( Port1 );
    ReefAngel.Relay.On( Port4 );
    ReefAngel.Relay.On( Box1_Port2 );
    ReefAngel.Relay.On( Box1_Port3 );
    ReefAngel.Relay.On( Box1_Port5 );
    ReefAngel.Relay.On( Box1_Port6 );
    ReefAngel.Relay.On( Box1_Port7 );
    ////// Place additional initialization code below here
ReefAngel.CustomLabels[0]="RETURN";  
ReefAngel.CustomLabels[1]="HEATER";  
ReefAngel.CustomLabels[2]="SKIMMER";  
ReefAngel.CustomLabels[3]="WP 10";  
ReefAngel.CustomLabels[4]="ACTINICS";  
ReefAngel.CustomLabels[5]="DAY LIGHTS";  
ReefAngel.CustomLabels[6]="FAN";  
ReefAngel.CustomLabels[7]="ATO";
ReefAngel.CustomLabels[8]="UV";
ReefAngel.CustomLabels[9]="DP-4";
ReefAngel.CustomLabels[10]="FUGE LIGHT";
ReefAngel.CustomLabels[11]= "LEDS";
ReefAngel.CustomLabels[12]="UNUSED";
ReefAngel.CustomLabels[13]="UNUSED";
ReefAngel.CustomLabels[14]="GYRE";
ReefAngel.CustomLabels[15]="Reactor";

    ////// Place additional initialization code above here
}

void loop()
{
    ReefAngel.StandardHeater( Port2,770,790 );
    ReefAngel.Relay.DelayedOn( Port3,10 );
    ReefAngel.StandardLights( Port5,10,0,21,0 );
    ReefAngel.StandardLights( Port6,12,0,19,30 );
    ReefAngel.StandardFan( Port7,790,800 );
    ReefAngel.SingleATO( true,Port8,1440,0 );
    ReefAngel.StandardLights( Box1_Port4,9,0,23,0 );
    ReefAngel.StandardLights( Box1_Port8,6,0,22,0 );
    ReefAngel.PWM.SetDaylight( MoonPhase() );
    ReefAngel.PWM.SetActinic( MoonPhase() );
    ////// Place your custom code below here
    if (hour()>=10 && hour()<19) ReefAngel.Relay.Off(Box1_Port4);

if(ReefAngel.HighATO.IsActive())
{
ReefAngel.Relay.Override(Port8, 0);
}
else
{
ReefAngel.Relay.On(Port8);
}
    ////// Place your custom code above here