Page 1 of 1
more problems
Posted: Thu Mar 08, 2012 3:03 pm
by ausreef
i was going to fit up the RA today has been running faultless on the table, but the screen has frozen half blank and no power at the pwm sockets ,red light is on,help please,have powered it up and down several times,joystick does nothing
Re: more problems
Posted: Thu Mar 08, 2012 3:20 pm
by rimai
What happens when you power cycle it?
Re: more problems
Posted: Thu Mar 08, 2012 3:21 pm
by ausreef
nothing it comes back on frozen red light on
Re: more problems
Posted: Thu Mar 08, 2012 3:25 pm
by rimai
Does the rel led blink when you turn it on?
Can you upload anything?
Re: more problems
Posted: Thu Mar 08, 2012 3:31 pm
by ausreef
the red light blinks 4 times then goes on,no i cant upload anything,also no power at the relay box outlets
Re: more problems
Posted: Thu Mar 08, 2012 5:13 pm
by rimai
When you try to upload any code, does it blink 4 times too a few seconds after you click upload?
Re: more problems
Posted: Thu Mar 08, 2012 6:59 pm
by ausreef
it comes up "autogenerated does not name a type"
after powering it down for 3 hours the screen has now come back and the red light is off,but we need to resolve the issue before i risk my livestock,im away from the tank 10 hours a day and cant risk unreliable equipment
you have a pm