Reef Angel Forum

• Added temperature range check
• RF Speed range changed from 0-255 to 0-100
• Salinity compensation (credits to ahmedess)
• Added internal memory functions for expansion pwm slope values
• Added Circles outlet box (credits to jsclownfish)
  Usage:

  Code: Select all

  ReefAngel.LCD.DrawCircleOutletBox(x, y, RelayData, reverse);

  x & y - screen coordinates
  RelayData - relay box to draw
  reverse - true/false to display order of outlets to match relay box
• Added WavemakerToggle function to toggle two relays on/off alternating
  Relay1 will be on and Relay2 will be off, then switch
  Usage:

  Code: Select all

  ReefAngel.WavemakerToggle(WMRelay1, WMRelay2, WMTimer);

• Bug fix for IO and PWM expansion module only refreshing on main screen

Added internal memory functions for expansion pwm slope values

TanksNStuff wrote:Curt,
I was eagerly awaiting this change:

Added internal memory functions for expansion pwm slope values

I just updated my Android app and the default value for start%, end%, and duration for all 6 PWM channels seems to be 255. That could be due to the fact that I didn't upload new code to my controller yet... but regardless, the % fields should be 0-100 range, no? 255 should not be a valid value.

Just wanted to check with you on this before I upload my revised coding to take advantage of these new memory locations and have problems.

Also, will I need to use the new PWM Parabola function instead of the slope to utilize these?

// These functions use the StandardLights time schedule for ON and OFF times
// PWMSlope,  channels 0 - 5
ReefAngel.PWM.Channel0PWMSlope();
// with a minute offset
ReefAngel.PWM.Channel1PWMSlope(60);  // 60 minute offset
// PWMParabola, channels 0 - 5
ReefAngel.PWM.Channel2PWMParabola();
// with a minute offset
ReefAngel.PWM.Channel3PWMParabola(30);  // 30 minute offset

// Then there's the LONG form of them if you did not want to use the StandardLights time schedule
// Replace the variables with the appropriate values
ReefAngel.PWM.SetChannel(4,PWMSlope(
  OnHour,
  OnMinute,
  OffHour,
  OffMinute,
  Start,
  End, 
  Duration,  
  ExpansionChannel[4] 
));
// PWMParabola
ReefAngel.PWM.SetChannel(5,PWMParabola(
  OnHour,
  OnMinute,
  OffHour,
  OffMinute,
  Start,
  End, 
  ExpansionChannel[5] 
));