Reef Angel Forum

Update: Prior to getting the current parameters from the Wifi module I also reprogrammed it again using the macro to make sure. My charts have updated now with historical data filled in, with most recent entries being moments ago. Thanks again rimai, I absolutely love my RA and would be crippled wit...

While connected on COM port to the wifi module this http request response repeated over and over in console. 192.168.0.150 is my RA controller IP. GET /r99 HTTP/1.1 Host: 192.168.0.150:2000 HTTP/1.1 400 Bad Request Content-Type: text/html; charset=us-ascii Server: Microsoft-HTTPAPI/2.0 Date: Thu, 29...

Output after running get e: <4.41> get e wifly-GSX Ver: 4.41 Build: r1057, Jan 17 2014 10:26:29 on 131C11 SSID=WiFly-GSX-bb Pass= Linkmon=3600 Beacon=102 Reboot=0 IF=UP DHCP=ON IP=192.168.0.150:2000 NM=255.255.255.0 GW=192.168.0.1 HOST=198.171.134.6:80 PROTO=TCP, MTU=1524 FLAGS=0x6 TCPMODE=0x0 BACKU...

I am also able to control the controller via portal, or via phone, or via reef angel client. My reef angel client (windows client) now has graphs up to date, but the portal is still broken back to 24th. If it is settings in the wifi unit would I have no connection at all, or could it be 'partially b...

Just loaded up the portal and it took 4 page refreshes until the 'Last update date' went from
Last Update:
12/24/2016, 8:16:25 AM
to:
Last Update:
12/28/2016, 9:00:32 PM

Very weird

Update: Web charts still have no new data since the 24th.

I performed the wifi macro using Teraterm with the wifi device plugged in to a local COM. During this process I noticed my RA's clock had reset back to the year 00, so I updated that as well. Seems to have come good and I now have a last update date of today on the portal. Web charts haven't updated...

My reefangelid:
silkjc
Connection Status:
Ready

Last Update:
12/28/2016, 12:09:05 AM
Displaying data from:
Reef Angel Controller (live)

Graphs have no data from December 24th onwards.

Yep same here. I have nothing from December 24th onwards. I thought it was something I did wrong and have been digging through all sorts of places to find the problem. I also use the 'Reef Angel Client' windows program, which also cannot get any data.

Hi guys, I have an RA+ with salinity and wifi expansion. I use both ATO ports for float valves, but wish to hook up a third float for skimmer over-flow protection. Since I don't really want to buy the IO module + expansion hub just for 1 input, I though perhaps I could re-purpose one of the dimming ...

Just posting to say I really love this application and find it much quicker to use than the portal. I hope development can continue!