Reef Angel Forum

ok Curt.

thanks a lot .

you are the best

on your last library, 0.9.6 , you add the function: SingleATOHighExtended(byte Relay); i add it on my .ino and i compile it right. I must modify the ATOHighTimeout .... how can i do ? Can i use your java ReefAngel Status changing the variable from byte to int ? for example i want 10 minutes. Can i s...

Can you improve the proxy support ?

Thanks

can i update in other mode ? what do this app ?

i don't want install .net

thanks

the next time it think that is better create a post with bug list for the new version... for 2 days my balling is stopped

I try to use: mode 1 ReefAngel.DosingPump1(Port3); ReefAngel.DosingPump2(Port5); mode 2 ReefAngel.DosingPumpRepeat(Port3, 0, 360, InternalMemory.DP1Timer_read()); ReefAngel.DosingPumpRepeat(Port5, 10, 360, InternalMemory.DP2Timer_read()); mode 3 ReefAngel.DosingPump(Port3, 1, 23, 00, InternalMemory....

Yeah, it's been one of the more requested features for sure. The next version still has a 2:00 countdown, but when in countdown mode, the text is a clickable hyperlink that does the reconnect action immediately. remember to add the support for password on the web RA :-D and also the internal memory...

Hi,
news ?

when arrive the new RA ?

will have the wifi built-in ?

Bye

[*]DosingPumpRepeat also has an offset from the run time now. So you can have your dosing pump run 5 minutes later if you like. This way you can have the pumps repeat every 4 hours and have one be 5 or 10 minutes later than the other, to prevent dosing at the same time. ReefAngel.DosingPumpRepeat(b...

Hi,
with the dev 5.19 is possible use the Arduino 1.0 ?

Thanks

Bye

if i put the delay to 500 the WD reset automatically the controller ?

on my office's pc, i have only this my pde: #include <ReefAngel_Features.h> #include <ReefAngel_Globals.h> #include <ReefAngel_Wifi.h> #include <Wire.h> #include <OneWire.h> #include <Time.h> #include <DS1307RTC.h> #include <ReefAngel_EEPROM.h> #include <ReefAngel_NokiaLCD.h> #include <ReefAngel_ATO...

What do you think ? I have this problem... the T1 probe sometime read 0 . For me this situation is much serious, because the fan and the heater don't work. I have the optiboot. Can i force the wdt reset or in the inizialization fase can have a problem ? i think t put at the end of my pde this string...

i have the .19 release. i change the value 812 memory trought the java client of Curt. i set it to 2 and i see that is at 2. But when the function start : ReefAngel.DosingPump(Port3, 1, 23, 00, InternalMemory.DP1Timer_read()); the on status don't run for 2 seconds, but for 6 seconds. Why ? is change...

What can i do ?

ok, but my friend with the MH 400w have the same problem....

The box of my friend mount this:

s14-1a-1216l
16a/250v
16a / 30v
coil 12vdc

But the problem is the same with MH 400w

Mmmm.... Are you shure ?

My last erder is new generation, but my friends with HQI 400w have the same problem.....

i think that is the first release.

I made a pre order of the RA, trought paypal. I'm the story of RA :-d

Hi,
i was using an Icecap 250W on my Port2 .... it's worked right for 2 weeks, but now the relay is always on.

The controller say off but it is always on. I think that the realy don't work with this icecap.

What can i buy ?

Thanks

Bye

in this image you can see where attach the cable

http://forum.reefangel.com/viewtopic.php?p=1033#p1033

great apps....

thanks curt

P.S. do you think is possible extend this apps for update the web banner and send the email allarm, like do the dave client ?

this applet works with the web authentication ?

Thanks

Bye

in the memory settings i cannot insert the temperature beacause the value start from 70,0 and my temp is in °C .



can you modify the value range starting by 20,0 ?

Thanks

i think that in the next release will beautiful have a support for:

- ReefAngel Controller authentication
- with Curt we made a new point in the internal memory for store the ATO and Overheat Alarms ....

i changed my board.txt and the type of the board in the Arduino IDE.

I reinstall the PDE and it's WORKS !!!!

Now, how can i use the WDT ? Curt on you latest release the function works right ?

oh yeah!!!!!! I retry on linux and it's works !!!!! [luke@PC_005299 ~]$ avrdude -c dapa -p m328p -e -u -U lock:w:0x3f:m -U efuse:w:0x05:m -U hfuse:w:0xDE:m -U lfuse:w:0xFF:m avrdude: AVR device initialized and ready to accept instructions Reading | ################################################## ...

the option -P i think that on linux is not utilized: [luke@PC_005299 optiboot_ReefAngel_v4.0]$ avrdude -c dapa -p m328p -e -u -U lock:w:0x3f:m -U efuse:w:0x05:m -U hfuse:w:0xDE:m -U lfuse:w:0xFF:m avrdude: AVR device not responding avrdude: initialization failed, rc=-1 Double check connections and t...

i try to use Linux and the avrdude. $ avrdude -c dapa -p atmega328p -e -u -U lock:w:0x3f:m -U efuse:w:0x05:m -U hfuse:w:0xDE:m -U lfuse:w:0xFF:m avrdude: AVR device not responding avrdude: initialization failed, rc=-1 Double check connections and try again, or use -F to override this check. avrdude ...

this is wrong: MCU_TARGET = atmega168 ..... no ?