If a person had too much money, and no common sense at all, and wanted to buy some 3/4 inch electronically controlled gate valves, where would he go?
I envision being able to use my Reef Angel to change a couple of valves and re-route some water flows in a series on tanks I want to build...
Anyone done this? Know where to get the parts? What are your ideas?
Thx in advance.
electronic pvc gate valves
-
rossbryant1956
- Posts: 471
- Joined: Sat Jan 14, 2012 2:08 pm
- Location: Montgomery Village, MD
electronic pvc gate valves
Roscoe's Reefs - Starting Over Again:
Building new 29g Nano after landlord went berserk over my 4 75 gallon tanks, Multiple RA's, Water mixing stations, etc. Your help welcomed in remembering all I've forgotten.
Building new 29g Nano after landlord went berserk over my 4 75 gallon tanks, Multiple RA's, Water mixing stations, etc. Your help welcomed in remembering all I've forgotten.
-
rimai
- Posts: 12857
- Joined: Fri Mar 18, 2011 6:47 pm
Re: electronic pvc gate valves
Are they pressurized lines or not?
If pressurized, you can get any valve with a solenoid.
If not, you will probably need a spring loaded valve of some sort.
Call grainger and they should be able to get you what you need.
If pressurized, you can get any valve with a solenoid.
If not, you will probably need a spring loaded valve of some sort.
Call grainger and they should be able to get you what you need.
Roberto.
-
rossbryant1956
- Posts: 471
- Joined: Sat Jan 14, 2012 2:08 pm
- Location: Montgomery Village, MD
Re: electronic pvc gate valves
not really pressurized, two are return lines, one is a water line from like a eheim 1262. Can I drive the solenoids with my Reef Angel?
Thx
Thx
Roscoe's Reefs - Starting Over Again:
Building new 29g Nano after landlord went berserk over my 4 75 gallon tanks, Multiple RA's, Water mixing stations, etc. Your help welcomed in remembering all I've forgotten.
Building new 29g Nano after landlord went berserk over my 4 75 gallon tanks, Multiple RA's, Water mixing stations, etc. Your help welcomed in remembering all I've forgotten.
-
rimai
- Posts: 12857
- Joined: Fri Mar 18, 2011 6:47 pm
Re: electronic pvc gate valves
Yeah, you can ask them for 12VDC solenoids and use any 12VDC walwart to drive the solenoids.
Call them and make sure to tell them you are working with very low psi to non existant psi.
Call them and make sure to tell them you are working with very low psi to non existant psi.
Roberto.