Reef Angel Installer missing RAGen.exe

Express Reef · Post by **Express Reef** » Thu Mar 21, 2013 6:45 am

Hi All,

I downloaded the Reef Angel installer from the Download portal, Im almost done setting up my wifi attachment, but I cant locate RAGen.exe looks like its not been installed I searched the entire folder where the reef angel app is been installed but there is no RAGen.exe

lnevo · Post by **lnevo** » Thu Mar 21, 2013 6:49 am

It's deprecated. There is a wizard built into the arduino app now.

Express Reef · Post by **Express Reef** » Thu Mar 21, 2013 6:51 am

Now how do I do the following? This is according to the Reef Angel Wifi manual
Enabling the wifi feature
1. Start the RAGen software
2. On the “Features” tab, make sure the “Wifi” checkbox is selected.
3. Click “Save” button.

DrewPalmer04 · Post by **DrewPalmer04** » Thu Mar 21, 2013 7:17 am

See your other post...

rimai · Post by **rimai** » Thu Mar 21, 2013 7:55 am

Express Reef wrote:Now how do I do the following? This is according to the Reef Angel Wifi manual
Enabling the wifi feature
1. Start the RAGen software
2. On the “Features” tab, make sure the “Wifi” checkbox is selected.
3. Click “Save” button.

Thanks so much for noting.
I did not realize that the RAGen was still referenced in the manual.
I'll get rid of it.
Thanks for the contribution

Express Reef · Post by **Express Reef** » Thu Mar 21, 2013 8:18 am

rimai wrote:
Express Reef wrote:Now how do I do the following? This is according to the Reef Angel Wifi manual
Enabling the wifi feature
1. Start the RAGen software
2. On the “Features” tab, make sure the “Wifi” checkbox is selected.
3. Click “Save” button.
Thanks so much for noting.
I did not realize that the RAGen was still referenced in the manual.
I'll get rid of it.
Thanks for the contribution

Roberto, im dont get my wifi to work!!!

the blue led keeps flashing

rimai · Post by **rimai** » Thu Mar 21, 2013 8:36 am

What is the security type and encryption you have in your network?
I've heard of some issues on WPA1-PSK.
Try using WPA2-PSK with AES encryption.

Redadeath · Post by **Redadeath** » Fri Mar 22, 2013 1:19 pm

plug your wifi attachment to the cable be sure the cable is in the right direction as mentioned in the manual

start the wifi setup wizard

wait until it communicate with your wifi attachment

enter the local name you add to your router ... ex " my home router " myname " ...dlink ...etc

and the passkey

wait untill the process end

if there is any problem send the message here or copy and paste screen shot of the message

Reef Angel Forum