No way to tell how often it will change. It's up to your ISP. Could be days or months.dapg8gt wrote:Thanks for the info guys appreciate it. Ive been all good for a few days and havent had to change anything how often would the ip change if it was to?
Absolutely love the android app just downloaded the update and I still need to figure out how to use it(app) to its potential. Leaps and bounds above the iphone app. Great job OP thanks
Colin,cosmith71 wrote:Too early to start wishlist for next version?
More user friendly memory location page. Maybe scrolling instead of dropdown, with a favorites list for frequently used locations. Also, support for Dosing Pump 3.
Webcam integration? On a swipe-to page?
--Colin
currently no, there is not a way to do that. I have been giving it some thought to improve the swipe to commands page and eliminate the standard commands page (from the options menu).Spotted wrote:Is there a way to customize the Command Screen? I have a few non standard commands, Nutrient Transport Mode and a Clear Siphon mode.
Is there any way to add those to the command screen, or other random whatever custom commands?
if you have that type of stuff created, then enabling the virtual outlets in the app happen automatically when the app connects to the controller (as you should already know). then you just need to label the port and you are set.lnevo wrote:I am working on virtual outlets in my pde to trigger things like that...i think we should promote more of this type of usage for interactions its better feedback then writing to memory locations
Looks really nice!binder wrote:I'm thinking of adding some icons to the Commands Page and then updating the layout a little. What do you think? It's just an idea I'
m toying with...nothing definite yet but could very easily be a solution.
Code: Select all
// Autogenerated file by RAGen (v1.2.2.171), (05/11/2013 19:36)
// RA_061112_0950.ino
//
// This version designed for v0.9.0 or later
/* The following features are enabled for this File:
#define wifi
#define WDT
#define CUSTOM_MENU
#define CUSTOM_MENU_ENTRIES 5
#define ENABLE_ATO_LOGGING
#define IOEXPANSION
*/
#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <AI.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <Salinity.h>
#include <PH.h>
#include <WaterLevel.h>
#include <ReefAngel.h>
////// Place global variable code below here
unsigned long clearsiphon=now();
boolean NTM=false;
////// Place global variable code above here
#include <avr/pgmspace.h>
prog_char menu0_label[] PROGMEM = "Feeding";
prog_char menu1_label[] PROGMEM = "Water Change";
prog_char menu2_label[] PROGMEM = "ATO Clear";
prog_char menu3_label[] PROGMEM = "Lights On";
prog_char menu4_label[] PROGMEM = "Lights Off";
prog_char menu5_label[] PROGMEM = "Clear Siphon";
prog_char menu6_label[] PROGMEM = "Nutri Transp";
PROGMEM const char *menu_items[] = {
menu0_label, menu1_label, menu2_label, menu3_label, menu4_label, menu5_label, menu6_label };
void MenuEntry1()
{
ReefAngel.FeedingModeStart();
}
void MenuEntry2()
{
ReefAngel.WaterChangeModeStart();
}
void MenuEntry3()
{
ReefAngel.ATOClear();
ReefAngel.DisplayMenuEntry("Clear ATO Timeout");
}
void MenuEntry4()
{
ReefAngel.Relay.RelayMaskOn = ReefAngel.LightsOnPorts;
#ifdef RelayExp
for ( byte i = 0; i < MAX_RELAY_EXPANSION_MODULES; i++ )
{
ReefAngel.Relay.RelayMaskOnE[i] = ReefAngel.LightsOnPortsE[i];
}
#endif // RelayExp
ReefAngel.Relay.Write();
ReefAngel.DisplayMenuEntry("Lights On");
}
void MenuEntry5()
{
ReefAngel.Relay.RelayMaskOn = 0;
#ifdef RelayExp
for ( byte i = 0; i < MAX_RELAY_EXPANSION_MODULES; i++ )
{
ReefAngel.Relay.RelayMaskOnE[i] = 0;
}
#endif // RelayExp
ReefAngel.Relay.Write();
ReefAngel.DisplayMenuEntry("Lights Off");
}
void MenuEntry6()
{
clearsiphon=now();
ReefAngel.DisplayedMenu=RETURN_MAIN_MODE;
}
void MenuEntry7()
{
NTM=true; // Enable NTM mode
ReefAngel.Timer[1].Start(); // Start timer for NTM mode
}
void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Initialize the custom menu
ReefAngel.InitMenu(pgm_read_word(&(menu_items[0])),SIZE(menu_items));
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = Port3Bit | Port5Bit | Port6Bit | Port7Bit | Port8Bit;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = Port1Bit | Port3Bit | Port5Bit | Port6Bit | Port7Bit | Port8Bit;
//Light On/Off Ports
ReefAngel.LightsOnPorts = Port2Bit | Port4Bit;
// Ports that are always on
ReefAngel.Relay.On(Port8); //Return Pump
//Adds Wifi function
ReefAngel.AddWifi();
////// Place additional initialization code below here
ReefAngel.Relay.On(Port8);
ReefAngel.Timer[1].SetInterval(900); // Timer for Nutrient Transport mode
////// Place additional initialization code above here
}
void loop()
{
// Specific functions that use Internal Memory values
ReefAngel.SingleATO(true,Port1,120,1); //ATO time out 2 minutes once every hour
ReefAngel.StandardLights(Port2,19,0,7,0); //Refugium Light on at 7PM off at 6AM
ReefAngel.StandardLights(Port3,7,0,19,0); //Blue LED on at 7AM off at 7PM
ReefAngel.StandardLights(Port4,8,0,18,0); // Daylight on at 8AM off at 6PM
// ReefAngel.StandardLights(Port5,6,0,22,0); //Turn off powerheads from 10PM to 6AM
// ReefAngel.StandardLights(Port6,6,0,22,0); //Turn off powerheads from 10PM to 6AM
ReefAngel.Relay.DelayedOn(Port7, 5); //Skimmer
////// Place your custom code below here
if (hour()>=22 || hour()<6)
{
ReefAngel.Relay.Off(Port5);
ReefAngel.Relay.Off(Port6);
}
else
{
ReefAngel.WavemakerRandom(Port5,60,90); // Port 5 on random wavemaker
ReefAngel.Relay.Set(Port6,!ReefAngel.Relay.Status(Port5)); // Port 6 is opposite of Port5
if (ReefAngel.Timer[1].IsTriggered()) // if timer for NTM mode is expired
NTM=false; // disable NTM mode
if (NTM) // if we are on NTM mode, turn ports on
{
ReefAngel.Relay.On(Port5);
ReefAngel.Relay.On(Port6);
}
}
////// Place your custom code above here
// This should always be the last line
ReefAngel.ShowInterface();
}I was going to suggest something like this. Bigger buttons would be nice, too.binder wrote:I'm thinking of adding some icons to the Commands Page and then updating the layout a little. What do you think?
It's just an idea I'm toying with...nothing definite yet but could very easily be a solution.
lights on lights off could be done with one button and showing a light off vs a light onbinder wrote:I'm thinking of adding some icons to the Commands Page and then updating the layout a little. What do you think? It's just an idea I'm toying with...nothing definite yet but could very easily be a solution.
but i think that layout is a bit better.. StandardLights are simply whatever lights you have connected to those ports. It is meant to refer to the function that you call StandardLights(...) inside your loop() function on your controller. It was just labeled Standard Lights and then there is another one called Metal Halides. It would be better termed "Timed Port". However, with that being said, you need to have access to memory locations to differentiate them. So that's why you have a Standard Lights and Metal Halides.dapg8gt wrote:edit= found out most all my questions just reading the thread .
Question for me is it seems that the light settings are different than what I am used to .. Are standard lights actinic? Mh would be my daylights? I have an ATI sunpower and used the wizard, settings are just day lights and actinic offset ? I found the actinic offsetting but am a little confused about what label is for my daylights?
So questions are what memory values do I alter for my T5. Use Mh for my daylight? just set the actinic offset to my preference? Or is it the standard lights label?? Tia..
Nope. You don't need to do anything special to the controller other than have wifi enabled (which you do, otherwise it won't work). The only thing you might want to do, is make sure that the "Pre 1.0 locations" is turned off (unchecked). If you are using the newer libraries (1.0 or greater), then you will need to uncheck that box so the correct memory locations are referenced. I need to change that to be unchecked in the next revision. I had it set because lots of people were using it who did not have the newer libraries and I didn't want to break anything. Now, I need to revert back and use the new locations.Is there anything I need to add code wise to my controller to have full access through the app memory wise? Thought I read it somewhere but can't find it anymore but I might be confusing it worth other threads in researching..
If you utilize all of those methods, then they can/will override each other. So if you enter feeding mode on the portal, the next time the droid app updates, you will see the ports toggled. Everything will work properly, I would just suggest that you always refresh the app (whichever one you are using) before you go updating anything. The iPad app updates as soon as you launch it. The portal updates as soon as you enter it as well. The android app does not auto update on entering the app....it simply displays the most recent data it has received.And also what happens if I have multiple things attached to it? I have ipad app, DROID app and sometimes the portal.. They will just override eachother with the commands? Thanks
that answered all my questions perfectly. It's up and running flawlessly. Great app Love that is so complete.. One word to explain it is AWESOME.. so glad I went with Ra over the Apex.. Support is amazing..
correct. support would have to be added to the libraries. it should be added in the default status xml so the mode is always sent.lnevo wrote:I think we'd need to add support for that in the libraries, but great idea to know what mode we're in!
I know I'd like to know if we arent in default mode as one time i was stuck in the setup date menu and things were not running like my heater..