Opening Serial Port...
Verifying speed at 9600 baud
Connected to serial port COM5
> $$$
> set u b 57600
> set s p 0
> save
> reboot
Verifying speed at 57600 baud
Removing connection to COM5
Connected to serial port COM5
> $$$
< CMD
Wifi is communicating at 57600 baud rate
> reboot
< reboot
Removing connection to COM5
---------------------------------------------------------------------
Wifi Attachment Connected to COM5
---------------------------------------------------------------------
Opening Serial Port...
Connected to serial port COM5
> $$$
< CMD
> ls
< ls
<
< FL# SIZ FLAGS
< 2 86328 3 wifly-GSX-400
< 4 74920 3 web_app-GSX-106
< 7 46632 3 wps_app-GSX-131
< 9 66240 3 eap_app-GSX-101
< 11 37282 0 web_config.html
< 21 512 0 link.html
< 22 7268 0 logo.png
< 24 1052 10 config
< 25 88548 3 wifly-GSX-441-r1057
< 26 1052 10 user
< 27 88548 3 wifly-GSX-441-r1057
<
< 122 Free, Boot=25, Backup=27
< <4.41>
> load user
< load user
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> save
< save
< Storing in config
< <4.41>
> set o d ReefAngelWifi
< set o d ReefAngelWifi
< AOK
< <4.41>
> set w l 5
< set w l 5
< AOK
< <4.41>
> set w s 51brewster
< set w s 51brewster
< AOK
< <4.41>
> set w p 12345678
< set w p 12345678
< AOK
< <4.41>
> set w k 00000000000000000000000000
< set w k 00000000000000000000000000
< AOK
< <4.41>
> set ftp address 198.175.253.161
< set ftp address 198.175.253.161
< AOK
< <4.41>
> save
< save
< Storing in config
< <4.41>
> reboot
< reboot
> $$$
< CMD
> show n
< show n
< SSid=51brewster
< Chan=6
< Assoc=OK
< Rate=12, 24Mb
< Auth=OK
< Mode=MIXED
< DHCP=FAIL
< Boot=0
< Time=OK
< Links=1
< <4.41>
> get i
< get i
< IF=UP
< DHCP=ON
< IP=0.0.0.0:2000
< NM=0.0.0.0
< GW=0.0.0.0
< HOST=198.171.134.6:80
< PROTO=TCP,
< MTU=1524
< FLAGS=0x6
< TCPMODE=0x0
< BACKUP=0.0.0.0
< <4.41>
> reboot
< reboot
Removing connection to COM5
---------------------------------------------------------------------
Your Reef Angel Wifi Attachment is now configured with the settings provided.
---------------------------------------------------------------------
If the blue LED is still blinking, it means that the Reef Angel Wifi Attachment could not connect to your wifi network.
Found router TC8305C
Port 2000 is now being forwarded to 0.0.0.0
I followed the Tera Term instructions, but it just sits with a blank screen after I connect the module on both baud rates. I am not sure what to try next???
Please help!
You are correct! It is working now, I just needed the correct IP address which wasn't shown in the utility but I found as I was reading through the config I just posted
