Who is using Comcast???

Expansion modules and attachments
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Who is using Comcast???

Post by Sacohen »

I can't seem to figure out how to use Tera Term or putty to even connect to the WiFi unit.

I removed the WiFi unit from the RA head unit and plugged the Serial to TTL cable into and into my PC.

Then when it was asking for an address to connect to I gave it the IP address that has been assigned to it (10.0.0.11).
Is there some thing else I should be using to connect to it.
rimai
Posts: 12857
Joined: Fri Mar 18, 2011 6:47 pm

Re: Who is using Comcast???

Post by rimai »

You must choose Serial connection.
Roberto.
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Who is using Comcast???

Post by Sacohen »

I think I did, but I'll check again.

Sent from my SM-G928P using Tapatalk
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Who is using Comcast???

Post by Sacohen »

rimai wrote:Use Tera Term or putty and type $$$ after you connect at 57600 baud.
It will prompt with CMD>
Type enter and anything else and it will show the version.

Ok I connected with TeraTerm and typed $$$.
Got the CMD

If I hit "Enter: it returns <4.00>
If I try enter with the word anything (or any other word) it returns
ERR: ?-Cmd
<4.00>
rimai
Posts: 12857
Joined: Fri Mar 18, 2011 6:47 pm

Re: Who is using Comcast???

Post by rimai »

That means you are in command mode.
All you need to do is type the command you want to send.
What are you trying to change?
You can make a mistake. It won't recognize backspace.
If you type anything wrong, you will have to type it again.
Roberto.
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Who is using Comcast???

Post by Sacohen »

I'm trying to find the firmware on the WiFi module, like you asked me too.

Sent from my SM-G928P using Tapatalk
rimai
Posts: 12857
Joined: Fri Mar 18, 2011 6:47 pm

Re: Who is using Comcast???

Post by rimai »

4.00 is the firmware version
Roberto.
rimai
Posts: 12857
Joined: Fri Mar 18, 2011 6:47 pm

Re: Who is using Comcast???

Post by rimai »

If you want to update, send command ftp u
Roberto.
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Who is using Comcast???

Post by Sacohen »

Do you think I need to update it?
What is the current firmware?
Could that be why I'm having problems keeping connectivity?
Do I need to download the current firmware from anywhere or will it do it automatically when I enter ftp u?
User avatar
lnevo
Posts: 5422
Joined: Fri Jul 20, 2012 9:42 am

Re: Who is using Comcast???

Post by lnevo »

I think you should also look at the recent thread about fixing connection issues...

I'm still unclear what issues you are having. After our last review we were all set...is it still where it works on wifi and not elsewhere or the reverse?
User avatar
Sacohen
Posts: 1833
Joined: Sun Apr 21, 2013 6:25 am
Location: Davie, FL

Re: Who is using Comcast???

Post by Sacohen »

It works on everything, when it works.
I lose connectivity about 2 times a week and I have to reboot the head unit to regain it.

Sent from my SM-G928P using Tapatalk
User avatar
lnevo
Posts: 5422
Joined: Fri Jul 20, 2012 9:42 am

Re: Who is using Comcast???

Post by lnevo »

Try this?

Have to reset WIFI every Night
This thread addresses this same issue. The fix there works for most, but not all people.
[url=http://forum.reefangel.com/viewtopic.ph ... 1&start=70]viewtopic.php?f=3&t=1871&start=70
http://forum.reefangel.com/viewtopic.php?t=5787#p50762
rimai
Posts: 12857
Joined: Fri Mar 18, 2011 6:47 pm

Re: Who is using Comcast???

Post by rimai »

Sorry, I forgot to mention you also need save and reboot.
So:

Code: Select all

ftp u
save
reboot
The latest is version 4.41
Roberto.
Post Reply