Purchased used unit

Rookie77 · Post by **Rookie77** » Wed Sep 04, 2019 5:02 am

Good morning all,

I purchased a used setup and it has a reef angel plus controller, wifi attachment (and the cable for it). I wanted to return the unit to default and see if the controller works as many of the other components I was sold is faulty. This is why I'm a little hesitant to spend the $40ish dollars for a ttl to serial cable. (From canada)

Does anyone have a pinout for this cable so I can at least try to program before I start spending money on other accessories?
I have several arduino components, the ttl to serial convertor and Dupont connectors.

rimai · Post by **rimai** » Wed Sep 04, 2019 8:35 pm

: ftdi.png (10.15 KiB) Viewed 4246 times

Rookie77 · Post by **Rookie77** » Thu Sep 05, 2019 3:22 am

Great, thanks. Board wouldn't power with my serial to ttl connected with this pinout. I changed the VCC location and got it to download the factory default program. Looking forward to trying this out tonight!
Thanks again

Reef Angel Forum