RA Star Port Labels

[cosmith71]

Is there a way to change the labels on these?

20200309_194827.jpg (719.04 KiB) Viewed 8685 times

Thanks,

--Colin

[rimai]

Are you using the web wizard or Arduino IDE?

[cosmith2]

Wizard. I can use the IDE if need be.

It seems like there was a function on the RA+ to assign labels on the screen. It's been a while and I can't remember.

[cosmith2]

ReefAngel.CustomLabels is the function on the Plus. Is there an equivalent on the Star?

[rimai]

On the webwizard, add these lines at the end of your code:

Code: Select all

// RA_LABEL LABEL_TEMP1=Room
// RA_LABEL LABEL_TEMP2=Display
// RA_LABEL LABEL_ATOLOW=ATO
// RA_LABEL LABEL_ATOHIGH=Skimmate
// RA_LABEL LABEL_ACTINIC=Gyre 1
// RA_LABEL LABEL_ACTINIC2=Actinic 2
// RA_LABEL LABEL_DAYLIGHT=Daylight
// RA_LABEL LABEL_DAYLIGHT2=Daylight 2
// RA_LABEL LABEL_PORT11=ATS Pump
// RA_LABEL LABEL_PORT12=ATO
// RA_LABEL LABEL_PORT13=Fan
// RA_LABEL LABEL_PORT14=ATS Light
// RA_LABEL LABEL_PORT15=Gyre
// RA_LABEL LABEL_PORT16=Heater
// RA_LABEL LABEL_PORT17=Skimmer
// RA_LABEL LABEL_PORT18=Return

[cosmith71]

Got it. Thanks!

I also found out the Wizard can do it, if I'd bother to enter in the labels.

[binder]

What about using the IDE? Is it inside RA_CustomLabels.h ?

[rimai]

You can change the file RA_CustomLabels.h

[binder]

You can change the file RA_CustomLabels.h

awesome thanks! that's what I thought (I discovered it after I posted my question).

Sent from my Pixel 2 using Tapatalk