Reef Angel Forum

either your tank is boiling OR more likely your reading is 18.5 degrees , decimal can be hard to see on the display

And once again all is good

Real steep learning curve here, got stop doing things with this on about 3 hours sleep, make too many stupid mistakes

Yep cool I will give it a shot tonight, thanks once again for all your help

Okay so I have activity on both 9600 and 57600
at 9600 I am getting an $$$...ERR: ? - Cmd..<2.32>.

and on 57600 just get 00 E0

ahh, leave it with me, been plugging and unplugging so many things this is where i have been going wrong

Yes sorry, have tried both, just gave it another shot this morning. Wifi is flashing quick blue and slow green, have tried the cool term connection with both 9600 and 57600 but its still not sending the $$$ string like it did last time to get the 2.32 coding message, although the controller was plug...

also just noticed this coming up on cool term, so it must have been talking tot he controller at some stage GET /status/submitp.aspx?t1=0&t2=0&t3=0&ph=827&id=aus996&em=72&rem=1&key=&atohigh=0&atolow=0&r=67&ron=0&roff=255&r1=0&ron1=0&roff1=2...

OK so i have disconnected the controller from the tank along with all the senors and got it plugged into another spare relay for power. I can, through arduino run the initial memory upload and still upload code without issue. When I open a connection the red light on he controller flashes rapidly I ...

ok mate will do, just got home and have a bit of time tonight to play with it cheer steve

Hi roberto it doesnt seem to want to reset, have follwed the instructions but it just reverts back to flashing blue and green, not solid red as per instructions

Hmm okay, i not sure where the hard factory reset button is located, is this on the main unit? I tried to connect with cool term but its not sending the string for some reason, it did before, although when i did log in initially the program switched of the RA program, not sure if this is what happen...

It was totally blank when i noticed the error, reconnected it and it was blinking blue, so thats when I figured it needed to be reconencted/reconfigured. I went back to the usb TTl cable to go through the process again and thats where the issue arose with the serial port connection

Hi Guys, my airport had an update which has impacted the wifi module i think. So went back to scratch and successfully did the inti memory and uploaded code so the controller is working but when I go into the wifi wizard i cant get a port connection as the first step, never had this issue before, pi...

Quite possible, Iwill chekc when I get home, i did seem to recall these two ports were different to the rest cheers

Hi Guys I have a single relay box set up at this stage, but it seems ports 5 and 6 are linked some how, when one is turned on the other also switches on , although it doesnt show up on the screen as such, same for turning off.

Any thoughts?

Hi Guys, literally only had this RA up and running int he last few days, still going through some teething issues but getting there. i am running everything on a mac and also using the Iphone app. Couple of quick things that I have noticed which may be bugs ( or could just be me :mrgreen: ) but I th...

id definitely be interested in one of these when it becomes available

Hi Guys. I ahve got wifi working :mrgreen: Can upload int memory and basic progrma and also reload previous programs :mrgreen: But when I come to upload the program that I just created using RA wizard it falls over at the last hurdle ith a time out error ( see below). Any thoughts? Date/Time Setup M...

Okay so just completing this post the following link explains what this issue is, it seems to have worked for me, however if you are running LION osx it may have been resolved in any case

http://www.ludicroussoftware.com/blog/2 ... w-leopard/

I am encountering the same issue, are you able to post what the fix was

yep thats next

AND TODAY'S I.T. AWARD GOES TO......... :?: Me :!: For putting in the code string for the ssid instead of the name of the airport which had been staring at me all the time. Of course once that was plugged in it worked first time. Also note that when you are in the wizard (for mac anyways) you can't ...

thanks roberto, its likely to be the encryption thing, ill check how to change this and give it a shot cheers steve

Hi Guys have a screen shot of the wifi wizard status now, still now joy on connecting. Hope the photo isnt too small tho

Okay scanned it and got two results both for my airport. The first one is the primary one and the second one is the guest network Is there any particular way I should be putting these into the wifi wizard, can I copy and paste. Just left out the last digits of both addresses SCAN:Found 2 Num SSID Ch...

Fear not you are not alone, i am tryingt o get my head around the system on mac as well but the people on the forum here are great and I am confident they will be able to help me through the initial teething stages

cool, of course I'm at work now so wont get to it until later this arvo. Im afarid IT stuff with me is like extracting teeth with a spoon, painful and often fruitless :-), and I havenet even got to really playing with th e code yet, although I did check out the wizard the other day and that looks li...

Ok guys getting there. Have learnt how to take screen shots on a mac :mrgreen: and upload picture on the forum :mrgreen: uploaded coolterm as it was the only one that i could see that had an option for Mac os :mrgreen: Now what? I managed to get a string of $$$ sent and you can see the cool term scr...

If the wifi doesn't have the push button, it won't help. Can you use Tera Term or putty to enter into command mode and get the result of the command below? scan Hi Roberto will try this as well when i get home but what are "terra Term" and "Putty", I am a complete newb when it c...

Will do guys , thanks for your help, gotta head to work now and will attcak it when i get home tonight and let you kno how I go