Reef Angel Forum

I got my RA working just recently and I came home and found that my Port 5 (Wavemaker 1) had stopped working. It still shows on the controller and on the Portal as though it were being turned on and off, but I get nothing out of my Koralia. I moved the Koralia to a different permanently on Relay for...

If you were toying with code and accidentally made it unable to compile on your PC, but still have a workable version on your RA, is it possible to extract the .ino from the controller itself? If so, how?

Thanks binder, and rimai, if you could compile that code I would really appreciate it.

Oh thank you, I would love to have that code if you could please!

So will the Wifi not work because of the custom code or is there another reason that Wifi will not work? And I can forgo the clouds as long as it's still possible to have alternating wavemakers, and the sunrise/sunset of the LED's, hopefully with ability to set times for actinics (channels 2 and 3) ...

I have things working, aside from that I still have to figure out how to set the time correct in my phone. I just can't seem to install RA Client so I'm getting my Wifi Module setup so I can change it with my Android Phone.. That being said, I used RAGen to give me the Wifi authentication code and t...

If you thought that there was a bug with RAGen, how would I go about making the time on my controller correct so I can see if it will be dimming in and out like it should?

Well that was that problem, I put my multimeter to it and found it was just fine, I plugged it in and it worked, therefore I must assume I didn't have it plugged in all the way because how things are now theres only a few more tickles for me to take care of. Controller thinks time is 11PM 1/1/00 Moo...

Yes I just got this expansion hub a few days ago, the PWM module seemed to be working as my lights would come on, and I once had code on there that tried to simulate a cloud and while it wasn't a polished effect, things changed. Ive also had some stock code on where I could turn the lights on and of...

unplugging the pwm expansion module alone didnt solve the problem, I had to unplug the the Expansion Hub. I know it's silly to have the expansion hub with only 1 module plugged into it, when I bought it, I got the expansion hub to make it easy to add more things on later. When I unplugged the expans...

Oh wow, using that memory file did indeed unstuck me. I was able to load that generic memory file and then load the code which I will copy here again // Autogenerated file by RAGen (v1.0.4.92), (09/17/2011 15:54) // RA_091711_1554.pde // // This version designed for v0.8.5 Beta 12 or later /* The fo...

Oh by the way I must have not hit post a while back, I had made a message indicating that I got the code to compile and load onto the RA by deleting my User/Arduino folder and reinstalling with the Library Update Tool. The problem now is that despite being able to load the code that you built for me...

I used to see Arduino alpha, but early today, after the advice to uninstall and reinstall everything I now just see Arduino with the infinity logo. And the banner on the program indicates Arduino 1.0.

One more thing if it helps anyone know what I'm messing up, even when I use the new RAGen, I get a similar error, which I'll display here. C:\Users\Ultra Peepi\Documents\Arduino\libraries\DS1307RTC\DS1307RTC.cpp:71: error: 'class TwoWire' has no member named 'read' C:\Users\Ultra Peepi\Documents\Ard...

I did what you said and opened RAGen, which does look new and excellent by the way. I clocked features and had selected only what you told me to, hit 'Save', then 'Close' then I opened Arduino - Reef Angel Controller, tried to compile that same code and got; C:\Users\Ultra Peepi\Documents\Arduino\li...

Everything is updated, I now have the Arduino 1.0, tossed in the above sketch, hit verify/compile and get the error message "sketch too big" Is there anything I can do about this by cutting something out?

Ok I replaced it so this is the code I'm trying to compile // Autogenerated file by RAGen (v1.0.4.92), (09/17/2011 15:54) // RA_091711_1554.pde // // This version designed for v0.8.5 Beta 12 or later /* The following features are enabled for this PDE File: #define DisplayImages #define DateTimeSetup...

I did update to 0.90 libraries and I also think this is a cause for my confusion rimai. I referenced the thread in Development Libraries and compared the instructions to what I have and added in some headers that I thought would help, and they did to a degree. I no longer have trouble with 'RETURN_M...

Thank you very much Curt, I got that replaced right away. However I still get the error 'RETURN_MAIN_MODE' not declared in this scope. I tried to find other people with similar issues and it seems like the code just doesn't know what RETURN_MAIN_MODE is referencing to, but I do not know how to fix t...

Roberto, thank you so much for the code, I really appreciate your willingness to help. I am having an error when I try to Upload the software of 'RETURN_MAIN_MODE' was not declared in this scope. I however did just update to the new 0.9 libraries which I'm feeling very well may be a cause of me not ...

I am trying to set up my RA I purchased. I bought the main unit, expansion hub, PWM expansion, two moonlights and will have my Wifi expansion here shortly. I am trying to figure out how to get some things set up how I was dreaming. I read the tutorials and have tried my best to understand the thread...