error: 'CurrentRelayState' was not declared in this scope

[serhiyi]

I just got my controller today and playing with code. I'm using RAGen to see how that works (trying to see what WiFi module and other settings can do for me).

I generated code and trying to load it. I got this error and can't pass over it:

Code: Select all

C:\Users\S\Documents\Arduino\libraries\ReefAngel\ReefAngel.cpp: In member function 'void ReefAngelClass::ShowInterface()':
C:\Users\S\Documents\Arduino\libraries\ReefAngel\ReefAngel.cpp:1464: error: 'CurrentRelayState' was not declared in this scope
C:\Users\S\Documents\Arduino\libraries\ReefAngel\ReefAngel.cpp:1501: error: 'CurrentRelayState' was not declared in this scope

Am I missing something?

Thanks.

[rimai]

I think you just found a bug
To overcome this, just make sure not to use the "Save Relay State" on the Features tab.
Then just generate the code again.

[serhiyi]

It still shows this error. What I did.

1. Opened REGen
2. Used defaults in "Features" and add WiFi

RAgen1.png (41.5 KiB) Viewed 5111 times

3. Used defaults in "PDE"

RAgen2.png (51.24 KiB) Viewed 5111 times

4. Used defualts in "Internal Memory"

RAgen3.png (51.5 KiB) Viewed 5111 times

5. Switched back to "PDE" and clicked Generate
6. Opened PDE file in Arduino (Reef Angel Controller)

Code: Select all

// Autogenerated file by RAGen (v1.0.4.92), (08/19/2011 23:01)
// RA_081911_2301.pde
//
// This version designed for v0.8.5 Beta 12 or later

/* The following features are enabled for this PDE File: 
#define DisplayImages
#define WavemakerSetup
#define DateTimeSetup
#define VersionMenu
#define ATOSetup
#define MetalHalideSetup
#define DirectTempSensor
#define DisplayLEDPWM
#define wifi
#define StandardLightSetup
*/


#include <ReefAngel_Features.h>
#include <ReefAngel_Globals.h>
#include <ReefAngel_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <ReefAngel_EEPROM.h>
#include <ReefAngel_NokiaLCD.h>
#include <ReefAngel_ATO.h>
#include <ReefAngel_Joystick.h>
#include <ReefAngel_LED.h>
#include <ReefAngel_TempSensor.h>
#include <ReefAngel_Relay.h>
#include <ReefAngel_PWM.h>
#include <ReefAngel_Timer.h>
#include <ReefAngel_Memory.h>
#include <ReefAngel.h>


void setup()
{
    ReefAngel.Init();  //Initialize controller

    // Ports that are always on
    ReefAngel.Relay.On(Port8);
}

void loop()
{
    ReefAngel.ShowInterface();

    // Specific functions
    ReefAngel.StandardATO(Port1);
    ReefAngel.StandardLights(Port2);
    ReefAngel.MHLights(Port3);
    ReefAngel.Wavemaker1(Port4);
    ReefAngel.Wavemaker2(Port5);
    ReefAngel.StandardFan(Port6);
    ReefAngel.StandardHeater(Port7);
}

Still got error

C:\Users\Sergey\Documents\Arduino\libraries\ReefAngel\ReefAngel.cpp: In member function 'void ReefAngelClass::ShowInterface()':
C:\Users\Sergey\Documents\Arduino\libraries\ReefAngel\ReefAngel.cpp error: 'CurrentRelayState' was not declared in this scope
C:\Users\Sergey\Documents\Arduino\libraries\ReefAngel\ReefAngel.cpp error: 'CurrentRelayState' was not declared in this scope

[serhiyi]

Tried with "Save Relay State" selected with same result

[serhiyi]

Looks like I fixed it.
I extracted all library files from RAGen installation and replaced files that I had before. Looks like this resolved the issue.

Sorry for false alarm.

[rimai]

Make sure the libraries folder in RAGen is setup correctly.
Go to menu Edit->Settings and look at the libraries folder and make sure it points to "Documents\Arduino\libraries"

[binder]

Good you got things fixed. There was an error when you enable the SaveRelayState feature.

The error has been fixed in the upcoming .17 release and SaveRelayState will now compile properly. I have not currently tested the feature but should work as expected.

curt