New RA Setup Assistance

New members questions
Post Reply
kirkwood
Posts: 173
Joined: Mon Apr 29, 2013 6:50 am

New RA Setup Assistance

Post by kirkwood »

My RA+ with Wifi arrives tomorrow. Can someone please direct me to the most current install thread?

thanks.
Image
dbmet
Posts: 235
Joined: Thu Nov 10, 2011 11:49 am

New RA Setup Assistance

Post by dbmet »

What kind of computer are you using? Pc or Mac? Have you downloaded the software from the Reefangel site?
http://www.reefangel.com/download.aspx
Image
kirkwood
Posts: 173
Joined: Mon Apr 29, 2013 6:50 am

Re: New RA Setup Assistance

Post by kirkwood »

dbmet wrote:What kind of computer are you using? Pc or Mac? Have you downloaded the software from the Reefangel site?
http://www.reefangel.com/download.aspx
PC. Yes I already downloaded and installed the RA software.
Image
User avatar
cosmith71
Posts: 1432
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City

Re: New RA Setup Assistance

Post by cosmith71 »

Check the download section for the manual. Pay close attention to the section "Loading your Initial Memory Settings". You have to do this or nothing else will work.

Post here if you need help!

--Colin
kirkwood
Posts: 173
Joined: Mon Apr 29, 2013 6:50 am

Re: New RA Setup Assistance

Post by kirkwood »

In reviewing the RA Manual, can I skip the initial part about connecting the ph and temp probe, powering up the RA, and cycling through the menus with the joystick? Can I just go directly to connecting the RA to my computer, loading in the memory, and then getting right into the Wizard to generate my custom code?

Then after I load in the custom code, I can start in with getting the WiFi running??
Image
User avatar
cosmith71
Posts: 1432
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City

Re: New RA Setup Assistance

Post by cosmith71 »

Yep. Sounds like a plan!

--Colin
kirkwood
Posts: 173
Joined: Mon Apr 29, 2013 6:50 am

Re: New RA Setup Assistance

Post by kirkwood »

Colin,

Does that Trendnet ip camera have an android app for viewing?
Image
User avatar
cosmith71
Posts: 1432
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City

Re: New RA Setup Assistance

Post by cosmith71 »

Yes, TRENDNet Cloud View. It's feature poor, but works.

--Colin
rossbryant1956
Posts: 471
Joined: Sat Jan 14, 2012 2:08 pm
Location: Montgomery Village, MD

Re: New RA Setup Assistance

Post by rossbryant1956 »

One of the things that I did when first starting was to go a little slower than you might like, but studied and implemented one thing at a time. That way I was sure what was causing a problem when things started not working like I expected. So to say:

1. Unpack and inspect
2. Power it up, load the initial memory settings as advised
3. Bring up one thing, a pump, a light, a temp probe, anything
4. Sit back, be proud, take a bow
5. Do another
6. repeat
Roscoe's Reefs - Starting Over Again:

Building new 29g Nano after landlord went berserk over my 4 75 gallon tanks, Multiple RA's, Water mixing stations, etc. Your help welcomed in remembering all I've forgotten.
kirkwood
Posts: 173
Joined: Mon Apr 29, 2013 6:50 am

Re: New RA Setup Assistance

Post by kirkwood »

I'm up and running with WiFi. So far so good.

Now I would like to know how to name my temperature probes so that on the RA display, portal, and droid app they say tank and room instead of T1 and T2. Also want to do the same thing to name my ports.
Image
User avatar
cosmith71
Posts: 1432
Joined: Fri Mar 29, 2013 3:51 pm
Location: Oklahoma City

Re: New RA Setup Assistance

Post by cosmith71 »

kirkwood wrote:I'm up and running with WiFi. So far so good.

Now I would like to know how to name my temperature probes so that on the RA display, portal, and droid app they say tank and room instead of T1 and T2. Also want to do the same thing to name my ports.
The portal is easy. Just open up the portal and go to "labels". You can re-name everything there.

On the android app, it's under Settings, Controller Information, Labels. Or you can just hit "Download" from the Controller Information menu to download all your labels from the portal.

On the RA screen, it's more involved. Start here:

http://forum.reefangel.com/viewtopic.php?f=14&t=109

Hope this helps.

--Colin
kirkwood
Posts: 173
Joined: Mon Apr 29, 2013 6:50 am

Re: New RA Setup Assistance

Post by kirkwood »

Thanks Colin. I'm making steady progress. Got my Label going now.
Image
Post Reply