Help... Im useless! dosing pump woes

New members questions
Post Reply
nerdz
Posts: 3
Joined: Tue Jun 25, 2013 5:31 pm

Help... Im useless! dosing pump woes

Post by nerdz »

Hi

Trying to get up and running to dose using 2 pumps, (Alk & Ca).

Just received Reefangel and I have no idea what I'm doing, but managed to get temp, pH, lights, fan, and WIFI running... Despite pumps set to run every 6 hrs, they have yet to come on, (I have the discharging into a graduated cylinder to measure volume).

I installed/updated pre-installed code and used wizard to generate :dosing, temp, light dimming etc...

Do you layer codes, ie: wizard generated one over preinstalled code, (like I did)?

Or, format head unit and upload only wizard generated one?


Thanks for any help
Cheers
User avatar
lnevo
Posts: 5422
Joined: Fri Jul 20, 2012 9:42 am

Re: Help... Im useless! dosing pump woes

Post by lnevo »

Post your code. Have you tried running the pumps manually and making sure they are working as expected?
nerdz
Posts: 3
Joined: Tue Jun 25, 2013 5:31 pm

Re: Help... Im useless! dosing pump woes

Post by nerdz »

Yes, both BRS pumps are brand new. I hooked them up and primed them until liquid came through.

Can my code be directly loaded over preset code?

This is the code I uploaded from wizard, PORT 3&4 for dosers:

#include <ReefAngel_Features.h>
#include <Globals.h>
#include <RA_Wifi.h>
#include <Wire.h>
#include <OneWire.h>
#include <Time.h>
#include <DS1307RTC.h>
#include <InternalEEPROM.h>
#include <RA_NokiaLCD.h>
#include <RA_ATO.h>
#include <RA_Joystick.h>
#include <LED.h>
#include <RA_TempSensor.h>
#include <Relay.h>
#include <RA_PWM.h>
#include <Timer.h>
#include <Memory.h>
#include <InternalEEPROM.h>
#include <RA_Colors.h>
#include <RA_CustomColors.h>
#include <Salinity.h>
#include <RF.h>
#include <IO.h>
#include <ORP.h>
#include <AI.h>
#include <PH.h>
#include <WaterLevel.h>
#include <Humidity.h>
#include <DCPump.h>
#include <ReefAngel.h>

////// Place global variable code below here


////// Place global variable code above here


void setup()
{
// This must be the first line
ReefAngel.Init(); //Initialize controller
// Ports toggled in Feeding Mode
ReefAngel.FeedingModePorts = 0;
// Ports toggled in Water Change Mode
ReefAngel.WaterChangePorts = 0;
// Ports toggled when Lights On / Off menu entry selected
ReefAngel.LightsOnPorts = 0;
// Ports turned off when Overheat temperature exceeded
ReefAngel.OverheatShutoffPorts = Port1Bit;
// Use T1 probe as temperature and overheat functions
ReefAngel.TempProbe = T1_PROBE;
ReefAngel.OverheatProbe = T1_PROBE;
// Set the Overheat temperature setting
InternalMemory.OverheatTemp_write( 815 );


// Ports that are always on

////// Place additional initialization code below here


////// Place additional initialization code above here
}

void loop()
{
ReefAngel.StandardHeater( Port1,776,780 );
ReefAngel.StandardFan( Port2,783,784 );
ReefAngel.DosingPumpRepeat( Port3,10,360,10 );
ReefAngel.DosingPumpRepeat( Port4,0,360,10 );
ReefAngel.StandardLights( Port5,13,0,22,0 );
ReefAngel.PWM.SetDaylight( PWMSlope(13,0,22,0,1,25,60,1) );
ReefAngel.PWM.SetActinic( PWMSlope(13,0,22,0,0,25,60,0) );
////// Place your custom code below here


////// Place your custom code above here

// This should always be the last line

Ha ha, I guess I couldn't see a level because it was only set for 10 sec? The wizard must of not taken my value?

I tried changing the code, I'll see if it works
ReefAngel.AddWifi();
ReefAngel.ShowInterface();
}
User avatar
lnevo
Posts: 5422
Joined: Fri Jul 20, 2012 9:42 am

Re: Help... Im useless! dosing pump woes

Post by lnevo »

Yeah 10 seconds on the BRS pump is nothing, 30ml broken into 24 doses is 68 seconds every hour. I think the conversion was .0183 ml/second...
Post Reply