Reef Angel Forum

Hi I am having the same issue. Where can I have my relay box repaired in South Africa?

Changed my dns name. Has not happened since. Happened a total of 9 times in 6 days.

Sent from my GT-I9500 using Tapatalk

I belive is a vindictive reefer

Sent from my GT-I9500 using Tapatalk

Its happened several times I did not hit it by mistake. Once was while I was sleeping at night

Sent from my GT-I9500 using Tapatalk

correct me if I am wrong but all that is needed to access and remote control another persons RA is the DNS name and the portal name no password or authentication?

Ie someone other that me is turning the ato pump on

Sent from my GT-I9500 using Tapatalk

Well done! I click the dot and its stops. That does not explain why the dot came up in the first place. Ir the fact that the entire ro tank has been dumped or that the pump has run dry for 7 hours

Sent from my GT-I9500 using Tapatalk

What can I do about someone hacking my RA unit. I will get home after work and the ato is stuck in the on position and all my ro has been dumped and the pump is running dry. if I access the unit via my cell it need the green dot cleared in order to stop. Please help asap

I will try test the unit on a friends ra. If no luck we can look at analysis I think

Sent from my GT-I9500 using Tapatalk

yup green led is showing, I have tested another 12v dc and another orp probe both with no luck. Is there any way to determine if the orp unit itself is giving out any outputs?

Any ideas.

Sent from my GT-I9500 using Tapatalk

How would it test if the orp expansion is working. It use to work fine. Then just stopped working. I get 0 reading from the orp. Even if I try calibrate it and use the terminator. Im using the ra+ no other add ons.

I will have to do some rewiring.

But the issue goes away when the t5's are unplugged

Sent from my GT-I9500 using Tapatalk

When my t5's turn on the atu pump goes crazy. I belive uts caused through induction voltage as the t5 wires run close to the float switch wires. Any thoughts?

Sent from my GT-I9500 using Tapatalk

Yes. Very easy. I got a thread somewhere if you do a search you will find it. Sorry but im on tapatalk only atm

Sent from my GT-I9500 using Tapatalk

Probably best to replace

Sent from my GT-I9500 using Tapatalk 4

Yes worked fine previously.

Sent from my GT-I9500 using Tapatalk 4

My ORP reads find on any reading below 325. at 325 it changes to 0 when ORP drops to below 325 it starts shoing reading again. Im using 1.0.2 libraries and modified the libraries to calibrate with 220mv fluid. when i recalibrate the terminator that came with the probe registers 1695 and the 220mv fl...

Thanks this worked perfectly

thanks will try the above and give feed back

I cant change the ATO time out parameter above 255 on the reef angel android app says it must be between 1 and 255.

id like port 5 to turn on for 10 seconds after the port1 ato turns off

I have a pressure pump attached to the RA top up (50 gpd pump)

I have 2 problems.

1. the max time out for ATO seems to be 255 seconds. Can i increase this?
2. Can i have the port 5 (kalk reactor pump) turn on once the ATO port 1 pump turns off?

I have spares from old hard drives and cdroms, I'll put in all 3

Sent from my GT-I9100 using Tapatalk 2

My unit only had one jumper I had only moved it. I added a second and it and now it seems to be working. do I need both jumpers inplace?

Sent from my GT-I9100 using Tapatalk 2

I will re-check that.

Anything else?

Sent from my GT-I9100 using Tapatalk 2

how do I know if the orp expansion os working. I have a STD pwm module wifi unit and orp expansion module. I have loaded the code and ,injected the expansion module. The orp readout remains 0 even in calibration fluid. After calibration. There are do values displayed during calibration either beside...

Thanks will see what i can get me hands on.

if i change the library code can i use 220mV calibration fluid?

thx, as soon as i get some orp calibration fluid ill try it out.

No, it won't work :( You will need to use the code posted by binder i incorperated it in the code void loop() { ReefAngel.StandardATO( Port1,120 ); ReefAngel.StandardLights( Port2,7,0,20,0 ); ReefAngel.StandardLights( Port3,7,0,20,0 ); ReefAngel.StandardFan( Port4,250,260 ); ReefAngel.StandardHeate...