Reef Angel Forum

a.ash wrote:When I have my iPhone set to connect through the "back door", that is, via cellular and connecting to my dynamic DNS service I don't get any tank data (temperature, etc). The relay's update just fine but no other data is reported.

Is direct connect on or off?

Just to add a bit more information incase any one else is wondering how. This would be configured in your "router" RA1 <-Internal IP:port-> 192.168.1.10:9000 <-External IP:Port-> 68.125.120.72:9000 (example ip's) RA2 <-Internal IP:port-> 192.168.1.11:9000 <-External IP:Port-> 68.125.120.72...

binder wrote:I just looked into publishing an app on the windows store and in order to do that, you must create a windows Dev Center account. They charge an annual fee of $99.

Hmm following apple's model.

Just got the iPad app! Looks great. A few issues though... no portrait mode? also Vortech mode shows the values in the Memory section but on the "My Tank" tab it shows no info... Also for the Memory section, would it be possible to make the "mode" a drop down with the different ...

I had to switch to the Plus when I changed to Ai LED's, other than that the regular was fine.

Thanks everyone for the good wishes. I submitted updates to both the iPhone and iPad apps last night. It will probably be about a week before they are live on the App store.

AquaO wrote:Ok thank,

it's not very serious for the moment it's only the ORP probe that I can not see with the wifi.

I really look forward to the Wifi and ORP expansion module and install it.

Thank Eric

New update was just submitted, ORP probe should be available once app is approved and released.

lnevo wrote:Yea, I'll be there!!! Ditch the iPad version...I use the iPhone version on mine.

Sorry about this, I have a new iPad version ready to upload. Just need to update it to the new logos.

Just an fyi...when i try an change memory locations on my iPhone the app crashes..so test that first otherwise you maybe investing time in something that is broken.. which libraries are you running? It was built for the pre 1.0 versions, the locations are different on the newer libraries. Working o...

Hey everyone, sorry for being a ghost for a while. My wife was in a bad car accident back in February and things are just now starting to get back to normal. I just updated my RA to the latest version and will start working on an update to the apps. If possible could someone compile a list of the fe...

I ordered snow leopard (10.6) Hopefully it will work after the upgrade. will keep you guys posted. I tried turning the Java on with same error. I am assuming the 10.6 will solve the problems hopefully. I can confirm that snow leopard works. I have a mac mini running 10.6.8 and I just went through t...

I m having the same problem. direct connect is on and I can view controls and memory but i cannot view My Tank parameters. whenever i press on My Tank it says "Enter RA URL in settings" even though i have direct connect on and it doesnt show any values Are you using your ip address or a u...

Hi John, I recently upgraded to an RA+ with v9 software and an expansion relay set. Works great on the iphone app, but the ipad app doesn't report the expansion relay and I get an msg to upgrade to v8.5.1.9 to use Modes. Not sure if those are related are not, but either way I thought I'd let you kn...

How is the android app updating the time on the controller? Any way I could schedule that update via a cronjob in Linux or scheduled task in Windows? Thanks! This could be done since you can update the time by connecting to a specific URL but you shouldn't be losing time. Get Roberto to take a look...

rimai wrote: Also, is there a way to get vortech stuff in there too

If someone wants to send me an mp10 and the module

I will add it in as a dedicated spot instead of having to use the custom variable.

I think it uses the same type of signal. I can't imagine they would create a new fixture that wouldn't work with their own controller or any third party controllers. its supposed to be a new wireless controller so I am not sure, there is supposed to also be an upgrade to the older fixtures for the ...

I will look into this.

did this get resolved? I'm having the same issue with the iphone app. Please help when you get a chance. Thanks. Jeremiah What issue are you having? If that data is not showing is direct connect on or off? With it off it will grab the information from the "portal," on it goes direct to co...

Any chance that those of us connected USB to comp to wireless connection to our home network canget this to work or is the wifi module the only way to use the iOS app? Thanks. Jeremiah currently you need the wifi adapter as that contains the "web server" part of the RA. I know there was a...

Make sure you have the latest app version. Uninstall it and redowbload from the store.

The AI cable uses one of the ATO ports so yes you can still use your RA with the AI's. I currently control two Ai nano's with mine. I am planning on independent controls so I can have more of a sunrise / sun set, but they are currently controlled together ramping up / down in unison.

Hey wolfador, I believe you are correct, but before I pay 20 for a dyndns, what do I need to do to make it work? do I need to keep a computer linked to the RA? Lol I am such a newb, p.s. I am an auto mechanic, if anyone needs advice I will happily help as a return favor! :) Mike It looks like dyndn...

ok everything works, but heres the question I have, when my cell is on the same wifi as my reef angel, I get live views every time I refresh on the app. as soon as I attempt to connect after removing my cell from wifi it doesnt connect. what should I do or what am I missing? you may be using your i...

Any progress curt? Honestly I have not had a chance to look into it lately. I haven't been in front of my computer much in the last week. It is on my TODO list, but finding the time lately for all my projects and working 50+ hours a week as a doctor kinda limits my time. The source for the Android ...

what version of iOS is your 3g running? I have it running on 4.3 but I think yours can only go to 4.2, Should be fairly close for it to work on yours. A few of the labels are slightly off as they switched from squared buttons to rounded on the newer iOS versions but everything else seems to be worki...

What exactly are you having trouble with? A basic setup is very easy. Plug everything in, fire up RAGen on your pc, select your options you want and upload.

That means you do not have the RA+, you can easily upgrade it. You should be able to do the LED's without it but would needs it for the RF module unless you cut some things from your current .ino

I was actually just given an iPhone 3g from a friend so I am going to test the app with it. Hopefully it will be a simple fix.

You will probably want to update your libraries, the newest ones came out on 3/25. You can use the update utility at: http://reefangel.com/Download.ashx

To check your version number you can go to http://youripaddress:2000/v

Help please I have been using the iPhone app for awhile now and have had problem, I am running the latest version. My problem is I have just added the expansion relay. I can see the relays on the app, but they are all off, when I turn one on it goes back to off straight away and isn't reading them ...